In the ecosystem of PC hardware, the power supply (PSU) serves as the irreplaceable "core" of the system. With the popularization of ATX 3.1 standards and PCIe 5.1 technology, the 2025 PSU market has entered an era where high efficiency and intelligence coexist. As a brand specializing in power supply solutions for years, GAMEMAX centers on the philosophy of "Performance & Innovation," offering a product line that covers the full power spectrum from 300W to 2000W. This article focuses on GAMEMAX PSUs, unveiling the selection criteria for the "best pc psu" through technical specifications and scenario-based recommendations.

GAMEMAX products strictly adhere to the 80 Plus certification system, ranging from the entry-level GP-450B (80 Plus Bronze) to the flagship RGB PRO 1300P (80 Plus Platinum), with efficiency metrics spanning from 82% to over 92%. Take the RGB PRO 1300P as an example: its 1300W power output, combined with a native ATX 3.1 12V-2x6 interface, directly supports the 600W peak power consumption of RTX 4090 graphics cards. The 92% conversion efficiency under typical loads means it saves approximately 60 kWh annually compared to ordinary PSUs.
High-end models like the GX PRO 1250G adopt an APFC+LLC+DC-DC hybrid architecture, paired with Japanese Nichicon capacitors, achieving ripple control precision within 50mV—critical for the stable operation of DDR5 memory and PCIe 4.0 SSDs. The mid-range GX 850GF achieves over 92% efficiency through LLC resonant technology, with an FDB fan controlling noise below 28dB at full load, striking a balance between "silence and performance."
GAMEMAX's full-line modular PSUs (e.g., RGB 1050G) use 16AWG low-impedance cables, with PCIe 5.1 interfaces supporting native 12VHPWR cables to avoid adapter losses. Notably, the GS 850G, an SFX-form factor PSU, integrates 850W power within a 125x100x63.5mm footprint. The combination of Japanese capacitors and intelligent temperature control makes it ideal for ITX cases like the NR200.
RGB PRO 1300P

1300W, 80 Plus Platinum certified, 92%+ efficiency under typical loads
Native ATX 3.1/PCIe 5.1 support, 12V-2x6 interface for direct RTX 40-series GPU connection
140mm ARGB fan with motherboard sync, adaptive thermal control stops fan at 60% load
Use cases: Dual-GPU SLI, Threadripper workstations, 4K gaming rigs
GX PRO 1250G

1250W, 80 Plus Gold efficiency, 90% typical efficiency via APFC+LLC architecture
Fully modular design with 10-year warranty, Japanese chemical capacitors ensure 100,000-hour lifespan
Silent optimization: 135mm hydraulic fan noise <30dB at full load
Cost-performance edge: 20% lower price than same-power platinum PSUs, suitable for budget-sensitive high-end users
RGB PRO 850G

850W, 80 Plus Gold certified, supports ATX 3.1/PCIe 5.1
12V single-rail output 70A, drives Ryzen 9 7950X + RTX 4070 Ti simultaneously
ARGB fan with motherboard sync for integrated lighting system
Use cases: 2K high-refresh gaming, 3D modeling, video editing workstations
GX 750GF

750W fully modular design, 92%+ efficiency from LLC+DC-DC technology
Compact size (140x150x86mm) compatible with 90% of cases, FDB fan enables "invisible operation"
Single 12V output 62.5A, more than sufficient for i7-14700K + RTX 4060 Ti combinations
GS 750G

750W SFX-form, 80 Plus Gold PSU, dimensions only 125x100x63.5mm
Japanese Nippon Chemi-Con capacitors + intelligent thermal control, fan stops at 25% load
Supports ATX 3.1 standard, native 12VHPWR interface for next-gen GPUs
Use cases: NUC9 equivalent barebones, HTPC home theaters, MOD custom cases
GT-450P BK

450W TFX-form, 80 Plus Platinum PSU, 80mm fan noise as low as 18dBA
Active PFC supports 100-240V wide voltage, suitable for overseas use
Single PCIe 6+2pin interface meets GTX 1650-class GPU needs
GP 850B

850W, 80 Plus Bronze certified, dual DC-DC control circuit enhances stability
140mm intelligent fan auto-stops at 40% load, ideal for office environments
Non-modular design reduces cost, black braided cables balance durability and cable management
Use cases: Multi-VM office setups, GTX 1660 Super-class gaming PCs
GM 600B

600W, 80 Plus Bronze, Taiwan Teapo capacitors ensure 50,000-hour lifespan
Fully modular design supports 按需接线 (on-demand cabling), improves case airflow
EMI anti-interference design, suitable for stability-demanding commercial environments
GAMEMAX's high-end series (e.g., RGB-Smart 1300 PRO BK) 率先采用 (pioneers) ATX 3.1 standards. The 12V-2x6 interface withstands 3x the transient power 冲击 (surge) of traditional PCIe, completely solving "driver drop" issues for RTX 4090 and other GPUs. Test data shows native cables reduce current loss by 40% compared to adapter solutions.
The APFC+LLC architecture in the GX PRO series not only boosts efficiency but also achieves "three-stage fan control" via precise temperature feedback: stops below 20% load, linear acceleration at 20%-60%, full speed above 60%. Take the GX PRO 1050G: its 135mm fan produces only 25dB in 3A gaming scenarios, 10dB better than the industry average.
For cryptocurrency mining needs, GAMEMAX offers professional models like the GM-2000 BK:
2000W high power supports 9 GPUs in parallel operation
8 independent 12V output channels, each supporting up to 300W
Dual 8cm ball fans, 30% improved heat dissipation efficiency under 7x24h operation
88% typical load efficiency, saves 5kWh daily compared to ordinary PSUs
Take a typical gaming configuration:
Ryzen 7 7700X (170W) + RTX 4070 Ti (280W)
Motherboard/memory/SSD peripherals (150W)
Recommended power: (170+280+150)×1.3=780W, suitable choice: GX PRO 850G
Cable management: PCIe 5.1 cables should be routed straight, avoid 90° bends to prevent increased impedance
Cooling optimization: Maintain 2cm clearance between PSU intake and case bottom, clean fan filters with compressed air quarterly
Compatibility check: ATX 3.1 PSUs require PCIe 5.1-supporting motherboards (e.g., Z790), legacy platforms should choose ATX 2.53-compatible models
Q: Are GAMEMAX Bronze PSUs worth buying?
A: GP series Bronze PSUs (e.g., GP 550B) use dual DC-DC control, with ripple suppression capability close to Gold level. Ideal for budget-conscious users seeking stability, 60% lower failure rate than no-name PSUs.
Q: Do SFX PSUs overheat more than ATX?
A: GS series SFX PSUs enhance power density via planar transformer technology. The GS 850G has a thermal density of only 0.8W/cm³; with intelligent thermal control, full-load temperature is 5℃ lower than same-power ATX PSUs.
Q: How to sync ARGB fan with motherboard lighting?
A: RGB PRO series supports 5V 3pin ARGB interface. Connect to corresponding motherboard slots, use software like ASUS Aura or MSI Mystic Light for synchronous control.
According to brand disclosures, GAMEMAX is developing 400W-class PSUs supporting 80 Plus Titanium CF (fanless) certification, scheduled for H2 launch. This series will adopt gallium nitride (GaN) power components, breaking the 10W/cm³ power density barrier, while dynamically allocating 12V/5V/3.3V outputs via AI algorithms to provide ultimate solutions for mini-PCs and silent devices. Additionally, 2000W+ Titanium PSUs for data center needs have entered the testing phase, expected to mass-produce in 2026.
From entry-level office use to professional mining, GAMEMAX redefines the "best pc psu" standard with its full-power, full-certification product matrix. Whether the RGB PRO 1300P pursuing ultimate performance or the GS 750G balancing silence and efficiency, the core always revolves around the fundamental need for "stable power supply." Choosing GAMEMAX means not just selecting a PSU, but purchasing a "safety insurance" for hardware upgrades over the next 3-5 years.
GameMax GX 750GF Modular Power Supply, 750W 80+ Gold certified, offers top-tier performance in a compact package. Key features:
• High Efficiency: Over 92% efficient with LLC & DC-DC technology for energy savings.
• Silent & Cool: HDB fan for whisper-quiet operation and effective heat dissipation.
• Modular Design: Easy cable management for a cleaner build and improved airflow.
• Stable & Durable: All-solid capacitors and SMT components ensure long-lasting reliability.
• Broad Compatibility: Supports latest graphics cards and full voltage input range.
• Protection: Seven levels of safeguards protect your system from harm.
GS 750G 80 Plus Gold Certified SFX Power Supply with Intelligent Cooling, Japanese Capacitors, and Comprehensive Protection
• 80 Plus Gold Certified Efficiency: Enhances power efficiency and stability, reducing the risk of system crashes.
• High-Quality Japanese Capacitors: Ensures long-term reliability and stability with 105°C electrolytic and solid-state capacitors.
• Intelligent Fan Control: 9.2cm hydraulic bearing fan with PWM automatic control starts and stops based on power consumption (above 20% and below), optimizing cooling and noise.
• Advanced Wireless Output Design: Gold-plated pins and high-density copper posts enable efficient, reliable power output and improved heat dissipation.
• Comprehensive Circuit Protection: Provides multi-layered protection (OPP, OVP, UVP, OCP, SCP, OTP) to safeguard your PC and components from damage.
RGB PRO 850G 850W 80+ Gold ATX3.1 Power Supply with Adaptive Fan & ARGB SYNC
• 80 Plus Gold Efficiency: Delivers 90%+ efficiency under typical loads, cutting power use and noise for dependable performance.
• ATX3.1 & PCIe5.1 Support: Native 12V-2x6 connector ensures seamless power to RTX 40/50 GPUs, optimizing delivery and reducing loss.
• Adaptive Fan Control: 14CM fan auto-adjusts speed based on load, balancing energy efficiency with quiet operation.
• High-Quality Components: Japanese 105°C and solid capacitors guarantee durability, stability, and reliability for intensive tasks.
• Customizable RGB Lighting: 25 lighting modes with memory and ARGB SYNC support, enabling personalized and synchronized visual effects.
GX PRO 1250G 80 Plus Gold Modular Power Supply: ATX3.1 Ready, Silent Cooling, & Premium Durability
• 80 Plus Gold Efficiency & Quiet Operation: Achieves 90% efficiency under typical loads with APFC+LLC+DC-DC design, minimizing power waste and noise.
• Premium Durability & Reliability: Built with Japanese 105°C capacitors and solid capacitors for long-term stability and performance.
• ATX3.1 & PCIe5.1 Ready: Features a native 12V-2x6 connector for seamless RTX 40/50 GPU compatibility and efficient power delivery.
• Advanced Thermal Management: 13.5cm FDB fan with intelligent temperature control ensures quiet cooling and optimal heat dissipation.
• Modular Design & Robust Protection: Fully modular layout with dual-stage EMI filtering and NTC thermistor safeguards against surges, while gold-plated cables ensure durable, high-conductivity connections.
RGB PRO 1300P 1300W 80+ Platinum ATX3.1 Power Supply with Adaptive Fan & ARGB SYNC
• 80 Plus Platinum Efficiency: Delivers 92%+ efficiency under typical loads, cutting power use and noise for dependable performance.
• ATX3.1 & PCIe5.1 Support: Native 12V-2x6 connector ensures seamless power to RTX 40/50 GPUs, optimizing delivery and reducing loss.
• Adaptive Fan Control: 14CM fan auto-adjusts speed based on load, balancing energy efficiency with quiet operation.
• High-Quality Components: Japanese 105°C and solid capacitors guarantee durability, stability, and reliability for intensive tasks.
• Customizable RGB Lighting: 25 lighting modes with memory and ARGB SYNC support, enabling personalized and synchronized visual effects.