GameMax RGB-1300 ATX3.0/3.1 PCIe5.0/5.1 Ready, Fully Modular 80+ Platinum Certified, LLC+DC-DC design for Powerful single +12V rail helps ensure a stable and reliable supply to other PC components. with 140mm ARGB fan helps deliver brighter and stunning light effect and supports synchronization with compatible RGB motherboards from ASUS, GIGABYTE, MSI, and ASRock for countless illumination possibilities.
⚡ATX3.0 PCI-E 5.0 Ready: It comes with 1x16pin 12VHPWR connector, for support latest GPU Cards
⚡80 Plus Platinum Certified: RGB-1300 with 92% efficiency or higher under typical loads. Lower power consumption, less noise, and cooler temperatures.
⚡RGB Light Mode: 25 smart RGB lighting modes with memory function, press the RGB controller switch to choose the color mode you like single color mode, breathing lights mode, and color mix mode.
⚡Full Modular: Free-Cable Design, Farewell to messy cables! The daughterboards are directly soldered to the motherboard for better heat dissipation and impressive output power quality.
⚡Ultra-quiet fan: The 140mm ultra-quiet fan keeps your power supply quiet while maintaining good heat dissipation.
⚡Output and Protection: Powerful single +12V rails offer stable DC output and support high-end graphic cards and PC systems. Excellent capacitors offer stability, durability, and reliability, OPP/OVP/UVP/SCP/OCP electrical protection included.
GameMax is proud to introduce Kreator Mid-Tower Computer Gaming Case. The Important feature is that users can easily DIY to write or erase letters or pictures or draw on the front glass The Front Glass with a backlit ARGB strip behind, will make the draw or letters you wrote by ARGB light in sync with the whole computer, Take you fresh mood to play computer in daily use Designed with a unique full ARGB light glass side panel, which can display various colors by HUB or Aura SYNC controlled,
It is with an ARGB V3.0 PWM Fan controller and Remote Controller, It with the unique perfect effect that Sync light model in the dual glass surface. The Kreator can support up to 5 fans and comes with a 3pin ARGB header to connect directly to each fan or strip to HUB, allowing you to control your fans and LED strip via built-in firmware.
The Kreator has a full-length PSU shroud, separated HDD bays, and plenty of cut-out holes for cable management means the case offers style, performance, and the ultimate experience, Kreator computer case, makes play different!
SILENT HILL H606
Advanced quiet system chassis
Micro ATX factor, PSU bottom loaded
Sound dampening material on both side panels to stop the vibration
Supports up to 340 mm long cards for high performance users
Tool-less HDD bays
CPU cutout for easy CPU installation
0.6mm mixed, Black painting interior
Precision 2 mid-tower gaming chassis, excellent performance, Type-C ready, The upgraded detachable top plate solves the common problems of ordinary chassis on the market, satisfies the rapid installation and maintenance of your computer hardware, and improves the ease of installation of hardware accessories It is more convenient to install the radiator and fan.
Upgrade the top plate, increase the height of the chassis, and solve the problem of mutual interference between the water cooling of the upper plate and the high bracket of the memory RGB cover
COC (Cooling & Overclocking) turbofan, T-shaped directional air duct, active cooling system, exclusive patented design
The all-metal mesh front panel is designed in one piece, and the dust-proof hole design is fully covered, focusing on the cooling airflow. Large space inside the chassis, supporting high-end graphics cards and large radiators
Dual ARGB light bar appearance, with ARGB HUB or motherboard ARUA synchronous interface control, provides a variety of colors and modes to personalize the appearance
Type-C is ready and the top Argb button is easy to use, and the functional interface is fully designed to meet the needs of various fast data transmission
Quick-release tempered glass side panel, one screw fixed design, convenient and quick installation, and follow-up maintenance requirements
Precision 2 mid-tower gaming chassis, excellent performance, The upgraded detachable top plate solves the common problems of ordinary chassis on the market, satisfies the rapid installation and maintenance of your computer hardware, and improves the ease of installation of hardware accessories It is more convenient to install the radiator and fan.
Upgrade the top plate, increase the height of the chassis, and solve the problem of mutual interference between the water cooling of the upper plate and the high bracket of the memory RGB cover
COC (Cooling & Overclocking) turbofan, T-shaped directional air duct, active cooling system, exclusive patented design
The all-metal mesh front panel is designed in one piece, and the dust-proof hole design is fully covered, focusing on the cooling airflow. Large space inside the chassis, supporting high-end graphics cards and large radiators
Dual ARGB light bar appearance, with ARGB HUB or motherboard ARUA synchronous interface control, provides a variety of colors and modes to personalize the appearance
Type-C is ready and the top ARGB button is easy to use, and the functional interface is fully designed to meet the needs of various fast data transmission
Quick-release tempered glass side panel, one screw fixed design, convenient and quick installation, and follow-up maintenance requirements
GameMax M65 micro gaming case with tempered front and side , included 3x ARGB Infinity fan by Internal ARGB HUB contorlled or via Aura Sync supported Dual Tempered Glass on front and sides and Top Panel with air vent magnetic filter Chassis and Easy ARGB control mode buttons and IO ports Dual internal layout optimized for maximum airflow or advanced water-cooling. Built-in ARGB V1.7 HUB controller, support Aura Sync with Asus, and MSI and Gigabyte, Asrock..etc any 5V 3pin addressable socket on motherboard
Don't let the compact size fool you see, this little one handles full size components while still offering roomy installation space.
Brand new for 2022 GameMax are proud to introduce the Diamond COC Mid-Tower PC gaming case. Designed with ease of build and finished with a premium aesthetic this case is for those wanting to go to the next level without breaking the bank.
Sliding Door Design, Easy open and close, The front panel has an ARGB strip built-in controller, It has the diamond perfect effect and the spectrum LED strip inlayed to give this case the perfect balance between style and RGB.
Patent COC Cooling&Overclocking Chassis, Active COC Turbo Fan and T-Shaped Air Intake, Direct Motherboard Cooling technology, Provides positive wind pressure to help Motherboard heat dissipation.
GameMax RPG(Rampage) Gold series GX-850 PRO 80+ Gold ATX3.0, PCIe5.0 Power supply, directly link RTX40 GPU cards! Without current loss compared with an old adapter cable technology! designed with stability and durability, GX RPG Series is the perfect choice to power your systems!
⚡Programming LLC MPS1213 Chipset LLC, More flexible than traditional LLC circuit design, Using software programming can make the entire LLC resonant circuit work in the best state. Good efficiency performance at light load and full load.
⚡DC-DC is controlled by the UP3861 chip. The 3.3V and 5V drive outputs form a 180-degree phase difference. more stable and the ripple noise is effectively reduced
⚡PCIE5.0 ready, Directly link by 12VPHWR connector, Provide 600W to GPU card! Additional along with rich connectors on backplane
⚡MPS6924 chip for synchronous rectification, which makes the synchronous rectification MOS tube always work in the best state and further improves the overall efficiency.
⚡Integrated all solid capacitors, Free-Cable module output, lower loss power
⚡105℃ main Japanese capacitor has a long life and smooth output
⚡100-240Vac full voltage input, Applicable voltage worldwide
⚡The temperature-controlled turbocharged axial fan is extremely quiet
⚡Total SIX levels of protection, OTP, OCP, SCP, OVP, UVP, OPP
⚡All black flat pure copper output cables, efficient and powerful
⚡Components by SMT produced, Quick 3D heat dissipation and more stable
GameMax GX-850 Modular,80+ Gold ATX Power supply, One of the innovative Gold design basis on Platinum Level, LLC and DC-DC circuit, the classic efficiency over 92%, The free-cable technology featured.
GameMax GX series power supply 80+ Gold certified that offers great value to gamers and system builders, FDB Fan reduces heat during heavy load while keeping the noise level down, Designed with stability and durability, GX Series is the perfect choice to power your systems!
⚡LLC+DC--DC high-efficiency 80+ Gold APFC Certified
⚡DC-DC integrated energy storage inductor, quiet and highly efficient
⚡100-240Vac full voltage input
⚡Multiple PCIE interfaces fully support the latest graphics cards
⚡Integrated all solid capacitor, Free-Cable module output, lower loss power
⚡Farad resonance capacitor is stable and efficient
⚡105℃ mainstream capacitor has long life and smooth output
⚡The temperature-controlled fan is extremely quiet
⚡Total SIX levels of protection, OTP, OCP, SCP, OVP, UVP, OPP
⚡All black flat pure copper output line, efficient and powerful
⚡Components by SMT produced, Quick heat dissipation and more stable
GameMax Cyclops Micro ATX 2PCS ARGB Fan Pre-Installed, USB3.0 port, Opening Tempered Glass Side panel, Airflow Gaming PC case Tower
⚡Spacious Internal Storage: This Micro ATX tower case gives you ductility to build your system. It supports a Mini-ITX/Micro ATX motherboard.
⚡Powerful Airflow: It could make more size options for users.5 fans: 2 x front,1 x rear,and Front:120MM/240MM liquid-cooling.
⚡Stylish Metal Mesh Front: Large front panel metal mesh and the top mesh allows maximum airflow that provides cooling for your power supply to keep everything stable. The symmetrical design shows a fashionable style and makes the overall look cool.
⚡Door Opening Design: Magnetic suction opening tempered glass designed, to make it easy and free to disassemble and install computer accessories.
GameMax Typhoon ATX Gaming case and Cooling and OverClocking(COC) Gaming Chassis, Active Motherboard Temperature Control Solution, Patent Design COC is Cooling & Over-Clocking, which means cooling overclocking. It is a new type of heat dissipation structure. A Turbofan is added to the main board of the chassis to form a new T-type targeted air duct inside the PC system to help cool down various accessories in the PC system This COC technology has also obtained two invention patents and two structural patents, which is a new technology developed by GameMax brand after hundreds of times of research and development in combination with the demands of different consumer groups in many countries around the world.
The front panel is a pre-installed ARGB strip and 4x ARGB light effect via build-in HUB, It gives big airflow and excellent effect and the spectrum LED strip is inlayed to give this case the perfect balance between style and RGB.
Gamemax ZORRO COC Black ATX Case, Dual Addressable RGB Strip with Various light modes, T-Shaped airflow channel with patent COC(Cooling & Overclocking Chassis), which active turbofan on motherboard plate, to help motherboard quick heat dissipation Along with Zorro COC is detailed design by 0.8mm thickness steel to increase stability ad stronger. 1x12cm ARGB fan on rear, front ARGB stri built-in HUB with ARUA Sync header, which link to ARGB socket of MB, to more playable for right mode.
Brand new for 2022 GameMax is proud to introduce the Diamond COC Mid-Tower PC gaming case. Designed with ease of build and finished with a premium aesthetic this case is for those wanting to go to the next level without breaking the bank.
Sliding Door Design, Easy open and close, The front panel has an ARGB strip built-in controller, It has the diamond perfect effect and the spectrum LED strip inlayed to give this case the perfect balance between style and RGB.
Patent COC Cooling&Overclocking Chassis, Active COC Turbo Fan and T-Shaped Air Intake, Direct Motherboard Cooling technology, Provides positive wind pressure to help Motherboard heat dissipation.
GameMax Contac Turbo mid-tower case features a unique one-pcs screw easy open glass side window, and along with a 14cm ARGB fan on the front, and 12cm fan on the rear, You can effortlessly control ARGB lighting and fans via GameMax V2.0 PWM+Rainbow HUB controller pre-installed, while Adaptive Noise Reduction optimizes via PWM controls. Includes 1x 12cm COC turbofan, GameMax Contac Turbo Gaming Chassis, Born for Intel Gen 10th CPU cooling solution of the system, COC is Cooling & Over-Clocking, which means cooling overclocking. It is a new type of heat dissipation structure. A Turbofan is added to the main board of the chassis to form a new T-type targeted air duct inside the PC system to help cool down various accessories in the PC system
Additional, Include a 1x ARGB Sync cable which allows the user more fun when playing the ARGB light, it is easy to shift manual or SYNC mode via the top RGB switch. ARGB 12cm Rainbow fan pre-installed to enhance the aesthetics of your build as seen through the Contac's stunning tempered glass panel.
GameMax Contac Turbo mid-tower case features a unique one-pcs screw easy open glass side window, and along with 14cm ARGB fan on front, and 12cm fan on rear, You can effortlessly control ARGB lighting and fans via GameMax V2.0 PWM+Rainbow HUB controller pre-installed, while Adaptive Noise Reduction optimizes via PWM controls. Includes 1x 12cm COC turbo fan, GameMax Contac Turbo Gaming Chassis, Born for Intel Gen 10th CPU cooling solution of system, COC is Cooling & Over-Clocking, which means cooling overclocking. It is a new type of heat dissipation structure. A Turbo fan is added to the main board of the chassis to form a new T-type targeted air duct inside the PC system to help cool down various accessories in the PC system
Addtional, Includ 1x ARGB Sync cable which allow user more funny when play the ARGB light, it is easy shift manual or SYNC mode via top RGB switch. ARGB 12cm Rainbow fan pre-installed to enhance the aesthetics of your build as seen through the Contac's stunning tempered glass panel.