Loading

PWM+RGB HUB V1.5

PWM + RGB HUB V1.5 RGB HUB
Подключение к блоку питания через Molex
Поддержка RGB SYNC с материнской платой и другими комплектующими
5 каналов , для подключения 3PIN вентиляторов с управлением PWM(скорости вращение)
5-канальное управление RGB через встроенную программу или SYNC с материнской платой
Одновременная поддержка 5 RGB вентиляторов.

PWM+RGB HUB V1.5

Demonstration about the design of the switch color:
1. If the PWM cable's connector is connected with the RGB interface, the computer will Reset
2. If the PWM cable's connector is connected with the On/OFF fan interface, the IC of Controller PCB will be destroyed.
3. if the On/OFF switch connector is connected with the PWM interface, no function, but no damaged Controller PCB
4. If the On/OFF switch connector is connected with the RGB interface, the color of  the RGB light will change, but the control board won't be destroyed.
5. If the RGB switch connector is connected with the On/OFF fan interface, the control board won't be destroyed
6. If the RGB switch connector is connected with the PWM interface, the control board won't be destroyed

In order to prevent misplugging, we designed the plug as follows:
1. The 3+4P of 1/2/3/4/S (FAN+RGB) plug Is black
2. The 6 (PWM) plug;, cream-colored
3. The 7 (Power Supply);, white
4. The 8 (key) ; black

RGB-PWM Control panel interface definition
1. 1/2/3/4/5 for 3+4P(2.54) interface, the 3P for fan, the 4P for RGB color light.
2. The RGB interface of 1/2/3/4/5 can be connect RGB header of fan or RGB strip.
3. 6 for the motheboaard CPU-FAN ,
4, The Plug of 7 is a floppy 4P interface which is connected with PC Power Supply.
5. The Plug of 8 is the connector RGB switch of  front panel of case
6. MB RGB connector to motherboard(MB) RGB SYNC (4pin) port onborad.

PWM+RGB HUB V1.5

1) The Fan is first connect to FAN1, so that Motherboard has RPM detect function

2) The RGB light mode will be control by build-in program on controller if it is not link to motherboard AURA SYNC connector

3) The RGB light mode will control by motherboard software if it is linked to motherboard

4) Test (PIN 1 and PIN2) for demo mode when it is PWM input cable not link to motherboard (Jumper 1 and 2, give full speed signal to Fan runing), It must no shortage when PWM cable is linked to motherboard

Lastest PC caseRGB+PWM V1.5 installation Ref..pdf


Рекомендуем

GameMax by Sohoo manufactory base CopyRight@2019

GameMax | Computer Case | Power Supply | Cooling Parts | Keyboard | Mouse | VR

Powered by GameMax 7.8 ©2020-2024  GameMax