GameMax Defender MB Mesh Caja Gaming Micro-ATX, 4 Ventiladores ARGB Preinstalados, Panel Frontal de Malla Metálica para Máximo Flujo de Aire
• Rendimiento de Enfriamiento Extremo: 4 ventiladores ARGB de 120mm en el frente, 3 ventiladores de 120mm ARGB en la parte trasera, manteniendo las temperaturas bajo control incluso en cargas altas.
• Panel Frontal Atractivo y Funcional: Malla metálica con agujeros de 1.0mm de diámetro, proporcionando un área abierta del 48.3% para mayor flujo de aire y prevención de polvo.
• Soporte para Radiador de 360 mm: Compatible con radiadores de 360 mm en la parte superior para un enfriamiento eficiente del CPU.
• Iluminación Personalizable: 16 modos de iluminación, incluidos RGB, Respiración y Monocromático, controlados a través del panel I/O superior con botón LED.
• Diseño Exclusivo de Ventiladores: Ventiladores diseñados específicamente para esta caja, optimizando tanto el rendimiento de enfriamiento como la estética.
| Model | DEFENDER MB(FTY#6673) | SPECIFICATION |
| Form Factor (Midi, Micro, Mini ITX, Full) | MICRO ATX | |
| Chassis | SPCC : 0.6mm | |
| PSU Form Factor | Bottom/ATX | |
| M/B Form Factor | M-ATX(200mm)、ITX | |
| Front Panel | ABS,Mesh | |
| Top Panel | metal cover | |
| Side Panel | Left | Tempered Glass |
| Right | Metal cover | |
| External Drive Bay(s) | 5.25" (ODD) | *0 |
| 3.5" | *0 | |
| Internal Drive Bay(s) | 3.5" (HDD) | *2 |
| 2.5" (SSD) | *3 | |
| 1*3.5HDD+3*2.5SSD or 2*3.5HDD+2*2.5SSD | ||
| I/O | Buttons | *3 |
| USB2.0 Port(s) | *2 | |
| USB3.0 Port(s) | *1 | |
| USB3.1 Port(s) | *0 | |
| Audio Support | *1 (COMBO AUDIO) | |
| Card Reader (Support) | *0 | |
| P-Lock | *0 | |
| RGB Controller | *1 | |
| Cooling Fan Support | Front | 1x12cm ARGB Fan (FN12A-M6) 2x12cm ARGB Fan (FN12A-S6) |
| Top | 3x120mm ,2x140mm (Fan optional) | |
| Rear | 1x12cm ARGB Fan (FN12A-S6I) | |
| M/B Cover | 2x120mm (Fan optional) | |
| PSU Cover | 2x120mm (Fan optional) | |
| Water Cooling Support (Radiator Size) | Front | 120mm, 140mm,240mm,280mm,360mm |
| Top | 120mm, 140mm,240mm,280mm,360mm | |
| Rear | 120mm | |
| M/B Cover | 120mm, 240mm | |
| Dust Cover | Bottom, right side panel and top cover with dust filter | |
| Slots | *5 | |
| Carton Logo | GAMEMAX | |
| Dimensions | Chassis | (L)415*(W)210*(H)435mm |
| Full Case (inc Fascia) | (L)461*(W)210*(H)450mm | |
| Carton | (L)497*(W)262*(H)515mm | |
| VGA Card Length | Up to 410mm(front cover w/o fan) | |
| CPU Cooler Height | 165mm | |
| SPS Length | up to 265mm(front cover w/o Water Cooling) | |
| Cable Management Depth | 25mm | |
1) Aura Sync ARGB header link to motherboard Addressable ARGB port on motherboard.
2) how to extension fans? 5V3pin ARGB header link addtional 3pin male of fan and Femal fan link to Motherboard Addressable ARGB port on motherboard, (under extension mode, it is avaliable for Aura SYNC only, ie, RGB light mode via softerware controlled, and build-in manual mode disable)
