ATX 12V V2.3, мощность 2000 Вт
Двойной шарикоподшипник 8см * 2, черный вентилятор
Поддержка до 9xGPU
Профессиональный Mining блок питания
Эффективность превышает 87% при 220 v (GOLD 90% )
MTBF: 100 тыс. Часов при 25 ℃
Кабели: 1x24PIN,12V8pin(4+4),9xSATA,18xPCI-6+2PIN(9xGPU card support),5x4PIN
- PSU Type： Minning
- Cabling： Wired
- Efficiency： 90+ Gold
Dual Fan Configuration
Gold Miner 2000W comes with double 80mm fan configuration,intake, and exhaustion. This fan configuration induces a straight-in, straight-out constant airflow that keeps the unit at the ideal temperature.
To keep the unit cool, the Gold Miner 2000W fans constantly run at their maximum speed of 4500 RPM. The fans are designed with 2-ball bearings to ensure high durability under this heavy usage.
Heavy Duty Cables
Standard power supply units come with AWG#18* cables, according to Intel’s Power Supply Design Guide. Mining usage scenarios might cause this type of cables to overheat burning the sheath and damaging the unit.Gold Miner 2000W comes equipped with AWG#16 cables, these cables ensure safe heavy-duty operation.
Connectors Optimized for Mining Systems
Gold Miner 2000W comes with 9 PCIe connectors, and 5 Molex 4 pin connectors.
This number of connectors is optimal for 9 VGA cards system configurations with their corresponding widget adapters.
|■||Gold Miner 2000W is designed for 9 VGA cards systems at Maximum. Adding more cards might DAMAGE THE UNIT AND YOUR SYSTEM.|
|■||The number of connectors of Gold Miner 2000W is strictly matched to its recommended load, adding connector splitters, to power extra components, might DAMAGE THE UNIT AND YOUR SYSTEM.|
|■||Make sure to connect each of your VGA cards to a PCIe widget adapter, and that the adapter is powered directly by Gold Miner 2000W through the corresponding Molex 4pin/PATA connector. Connecting the VGA cards directly to your motherboard might DAMAGE THE UNIT AND YOUR SYSTEM.|
|■||Mining systems generate considerable heat. Thus, your mining environment should be adequately ventilated. Less than ideal ventilation might reduce the lifetime of your system.|
|■||All connectors in Gold Miner 2000W have a particular purpose. PCIe connectors should power VGA cards, Molex 4pin/PATA connectors should power either your PCIe widget adapters or fans, and SATA connectors should power the hard drives.|
|■||Incorrect usage, as judged by our technical team, will void your warranty.|
|■||The 2000W Gold Miner, dimensions 150x86x245mm (WxHxD), can be installed in standard PC ATX Tower cases. Due to the unit’s dimensions, it is recommended to measure the space available in your case to confirm compatibility.|