GameMax Defender MB Mesh Micro-ATX Gaming PC Case, Pre-installed 4x ARGB Fans, and fully metal mesh on the front panel for maximum airflow
• with 1 x Tempered Glass Panel, Top support 360 liquid CPU cooler, Pre-installed 4x ARGB Fans, and fully metal mesh on the front panel for maximum airflow
• Extreme Cooling Performance: With 4x 120mm ARGB fans in the front 3x120mm ARGB fan at the rear 1x120mm ARGB Fan,keeps temps in control even during high loads
• Compelling Front Panel: The front panel balances functionality and aesthetics This mesh consists of 1.0mm diameter mesh holes spaced at 2.0mm apart, providing a 48.3% open area ratio that allows greater airflow to pass through and efficiently prevents dust from entering the PC.5xPCIe Slot position, born for thicker RTX-40xx series GPU card, leaves additional space to increase cooling of the video card, improve performance and stability
• Support Top 360mm Radiator: With support for up to a 360mm liquid cooling radiator in top, the case is easy to build with and easy to cool your CPU better.Play through 16 lighting modes via the top I/O panel using the LED button
• 30 total play-through options include RGB, Breathing, Single Color, and Light Off
• Fans are proprietary to this case.
| Model | DEFENDER MB(FTY#6673) | SPECIFICATION |
| Form Factor (Midi, Micro, Mini ITX, Full) | MICRO ATX | |
| Chassis | SPCC : 0.6mm | |
| PSU Form Factor | Bottom/ATX | |
| M/B Form Factor | M-ATX(200mm)、ITX | |
| Front Panel | ABS,Mesh | |
| Top Panel | metal cover | |
| Side Panel | Left | Tempered Glass |
| Right | Metal cover | |
| External Drive Bay(s) | 5.25" (ODD) | *0 |
| 3.5" | *0 | |
| Internal Drive Bay(s) | 3.5" (HDD) | *2 |
| 2.5" (SSD) | *3 | |
| 1*3.5HDD+3*2.5SSD or 2*3.5HDD+2*2.5SSD | ||
| I/O | Buttons | *3 |
| USB2.0 Port(s) | *2 | |
| USB3.0 Port(s) | *1 | |
| USB3.1 Port(s) | *0 | |
| Audio Support | *1 (COMBO AUDIO) | |
| Card Reader (Support) | *0 | |
| P-Lock | *0 | |
| RGB Controller | *1 | |
| Cooling Fan Support | Front | 1x12cm ARGB Fan (FN12A-M6) 2x12cm ARGB Fan (FN12A-S6) |
| Top | 3x120mm ,2x140mm (Fan optional) | |
| Rear | 1x12cm ARGB Fan (FN12A-S6I) | |
| M/B Cover | 2x120mm (Fan optional) | |
| PSU Cover | 2x120mm (Fan optional) | |
| Water Cooling Support (Radiator Size) | Front | 120mm, 140mm,240mm,280mm,360mm |
| Top | 120mm, 140mm,240mm,280mm,360mm | |
| Rear | 120mm | |
| M/B Cover | 120mm, 240mm | |
| Dust Cover | Bottom, right side panel and top cover with dust filter | |
| Slots | *5 | |
| Carton Logo | GAMEMAX | |
| Dimensions | Chassis | (L)415*(W)210*(H)435mm |
| Full Case (inc Fascia) | (L)461*(W)210*(H)450mm | |
| Carton | (L)497*(W)262*(H)515mm | |
| VGA Card Length | Up to 410mm(front cover w/o fan) | |
| CPU Cooler Height | 165mm | |
| SPS Length | up to 265mm(front cover w/o Water Cooling) | |
| Cable Management Depth | 25mm | |
1) Aura Sync ARGB header link to motherboard Addressable ARGB port on motherboard.
2) how to extension fans? 5V3pin ARGB header link addtional 3pin male of fan and Femal fan link to Motherboard Addressable ARGB port on motherboard, (under extension mode, it is avaliable for Aura SYNC only, ie, RGB light mode via softerware controlled, and build-in manual mode disable)
