GameMax's new Combat chassis is a mid-tower Military-style chassis supporting ATX and m-ATX form factor motherboards. Builders can assemble and expand faster with tool-less drive bays and customizable H.D.D trays. the front top of the case Integrates a USB3.1 Gen1 and USB2.0 connectors, The build quality that this case offers, along with the features, coupled with a justifiable selling price, make it an interesting option to consider for a mid to low range gaming build.
Gamemax Cooling Fan offers the best performance with a low noise level and a stunning look.
The Hydraulic Bearing system gives the product a longer life and ensure a higher performance.
Recommended for all Gaming chassis.
* Full white frame and blade at silent design
* Black frame of fan
* 9 fan blades
* Long life Hydraulic bearing
* Optimized silent design, quiet operation with low RPM.
* High air flow for maximum cooling performance
* Both 3&4 pin connector
GameMax FN12A-S3I-W, 120mm White frame ARGB Fan x3,120mm Computer case fan!
⚡ Revolutionized daisy-chain ARGB fan.
⚡ Infinity mirror look all around.
⚡ 3 pcs 120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet.
⚡ Only one cable is required for a cluster of fans.
⚡ Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity.
⚡ 26 LEDs in each fan,Center 8pcs, Outer ringg 18pcs.
GameMax Cute Owl, Show your style of PC on Desk!
Silicone magnetic suction binaural, can change position
Open Architecture
An ARGB light-emitting panel
Support 2 12CM fans, 1x12cm ARGB fan front panel
Supports 1 9CM fan on the rear panel
Extra long graphics card can be installed
Back Route Management
Kensington, padlock, anti-intrusion, electronic lock (optional)
GameMax RA300 WH, 120mm White frame ARGB Fan 3 in 1 Kit, High-Performance Cooling Fan for PC Case.
⚡【Intelligent Speed Control】3 pcs 120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet. These fans are 3pin 5v ARGB connectors that connect with ARGB control HUB one by one.
⚡【Inner And Outer Light】Addressable RGB LEDs can be controlled by ARGB remote controller, Multiple ARGB light modes and speeds, provide colorful streamer lighting effects. creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch the fan hub's ARGB signal to the motherboard 5V ARGB port by AURA Sync Mode.
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 31.21dBA.
GameMax RA300 BK, 120mm Black frame ARGB Fan 3 in 1 Kit, High-Performance Cooling Fan for PC Case.
⚡【Intelligent Speed Control】3 pcs 120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet. These fans are 3pin 5v ARGB connectors that connect with ARGB control HUB one by one.
⚡【Inner And Outer Light】Addressable RGB LEDs can be controlled by ARGB remote controller, Multiple ARGB light modes and speeds, provide colorful streamer lighting effects. creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch the fan hub's ARGB signal to the motherboard 5V ARGB port by AURA Sync Mode.
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 31.21dBA.
GM-Series power supply, Semi-modular cables allowing you to only connect cables that your system needs. Fewer cables allow it to be tidy and better airflow inside your case. High efficiency with multi-protection gives the user durability and total confidence in your next system build.
• Built-in APFC (Active Power Factor Correction) rates > 0.9
• Smart semi-modular design offers easier cable management
• Up to 85%+ efficiency with official 80Plus certificate
• Mesh sleeves reduce the blockage of system air flow
• Silent 14cm fan with optimized thermal fan speed control
• Powerful single +12V rail offers compatible DC output
Specifications are subject to change without notice. Products and models may vary depending on your region. Contact your local retailer for more information.
After view GameMax Leader item, you will surely buy it, not choose other brands. Because you can't find a better configuration than ours at the price. Reasons: ①Has 6 Auto speed adjustable ARGB fans;②New designs have side opening door. No need to remove screws, can super easily open the inner case to clean the radiator and graphics card dust, also easy to put in different dolls. Friends will think your case is cool!
• 6 Highly Configurable ARGB Fans Pre-installed- (1) Ensure your motherboard has a 3PIN RGB interface and use the motherboard lighting software to control the fans, each addressable ARGB fan can offer 16.8 million colors of special customizable lighting. (2) Adjustable speed PWM fans allow pc case for better silence and better cooling depending on demand. (3) Remote controller for adjust light mode by built-in program and speed of ARGB fans.
• Expensive Glass Side Door - Not only is it more stylish than other brands of gaming cases, but it also solves cooling problems much better. Tempered glass side panel with metal pull ring that can be opened at any time for 76% better cooling than non-side-opening mid-tower pc cases. Easily install internal PC components and place any hand puppet you like. Add to the fun!
• Large-space full-tower case - Meets the installation needs of over 95% of customers. Plenty of room to easily install the top 420 water drain without touching the memory sticks. Plenty of space for cable management in case, provides multiple HDD mounting slots, large storage capacity, maximum capacity 4*SSD or 2*SSD+2*HDD.
• Meet the installation needs - the chassis provides a variety of graphics card installation methods. When the graphics card is inserted vertically, the design of the high-transparency glass door can show off your GPU very well.
• Smart I/O Panel Design - The equipped multifunctional I/O panel has enough ports to provide great flexibility for a variety of mobile audio accessories. Includes 1 Type-C Gen2 2x2 port ready for faster transfer speeds.
• HIGH-PERFORMANCE AIRFLOW: - Clean design,Large front mesh front panel for optimal cooling performance, Perforated front direct filtered air through the case to cool down components and enhance performance.
GameMax Storm Micro-ATX Gaming Case with 1 x Tempered Glass Panel, Top USB3.0/USB2.0/Audio Ports, Pre-installed 1x FRGB Fans, and fully metal mesh on front panel for maximum airflow.
⚡Stylish contemporary micro-ATX computer gaming case with 1x tempered glass window (left), mesh front panel, 1x FRGB fans preinstalled.
⚡Mesh front panel, Designed for Optimal Airflow
⚡5xPCIe Slot position, born for thicker RTX-40xx series GPU card, leaves additional space to increase cooling of the video card, improve performance and stability
⚡Supports Micro-ATX, and Mini-ITX motherboards, USB3.0/USB2.0/HD Audio ports, and improved cable management
⚡Support Top 240mm Radiator Top or Front, the case is easy to build with and easy to cool your CPU better.
⚡Supports video cards up to 320mm in length & CPU coolers up to 155mm in height
Room for up to six 120mm fans & supports up to 120mm radiators on the rear.
Relaxing gaming chair in black by GameMax GCR07 with soft and extra thick cold foam upholstery
100% vegan PU artificial leather cover
Rear of the back rest with carbon look
Extra thick cold foam upholstery
Fixed armrests with soft cushioning
Safety class 4 gas lift
Top-notch rocking mechanism up to 15°
rocking mechanism & 50 mm casters
80mm Class4 gas lift with dust cover
350mm nylon base
1. Matching all GMX RGB fans model
2. Support to multi-programed RGB light model
3.Remote control function
4. Morex 4P powered
5.RGB round header for matching mainstream connector type
6. Support total 4xRGB fans
7. With RGB round header adapter pin
8. Controller is seal in a box for safty long life
The GameMax VP series power supply offers “Value and Performance” scheme. 80Plus ready for support high efficiency required, also it is continuing a popular for computer builds.
GameMax VP RGB Range have great features that make it a good choice for people who are looking for an efficient and reliable, good value power supply. The most suitable cost/performance ratio is the best choice for system builder. RGB LED Lighting to power your system with style. Bring your system to life with build-in unique lighting effects that without additional controlled used.
GAMEMAX Quest E-ATX PC Gaming Case, Pre-Installed 1X 120mm Black Fan, Top and Front 360mm Radiator Support, Side Tempered glass and soild metal front panel, Type-C USB3.2 Gen2 2x2 Port Ready!
⚡Designed Using Tempered Glass – On the new version of the Quest we have added a four-millimeter tempered glass front panel ensuring the ambient lighting coming from your ARGB fans shines through and a more detailed view of the ARGB fans in action.
⚡Airflow – 1x fans comes standard with the Quest and the chassis can mount another EIGHT fans (front, top, PSU cover) to help create the perfect balance of air running in and out of your system. Air vents run down either side of the front panel help to aid airflow.
⚡ Support Top 360mm Radiator: For enthusiast-grade cooling, 2,360-millimeter radiators are supported on the top and front panel to keep the most extreme systems cool.
⚡Internal Components & Compatibility – Made using an all-black interior the Quest has plenty of space to fit higher-end hardware to boost the overall performance, with room to fit an EATX motherboard, with 7x PCI-e expansion slots, and there is plenty of storage. A total of five hard drive bays can be mounted and graphic cards up to 410mm in length and a CPU cooler with a max. length of 165mm.
⚡Full-Length PSU Shroud – Support 265mm longer PSU unit, Keep your build tidier by keeping the power supply and other cables out of sight, making clean builds even easier to achieve.