As high-performance PC hardware evolves at an accelerating pace, the power supply (PSU) has become increasingly critical as the dynamic hub of the entire system. For top-tier platforms equipped with RTX 40/50 series graphics cards and multi-core CPUs, a PSU with ample wattage, 拔尖 efficiency, and exceptional compatibility is no longer a luxury but a necessity. As a flagship model in the 1300W PSU category, the RGB PRO 1300P redefines the technical standards for high-end PSUs with its 80 Plus Platinum certification, ATX 3.1 compliance, and ARGB lighting system.
The 1300W rated power is far from a mere numerical specification; it’s a forward-looking design for the power consumption trends of future hardware. When an AMD Ryzen 9 7000-series CPU and an RTX 4090 graphics card operate at full load simultaneously, the total system power consumption can exceed 800W. The RGB PRO 1300P not only provides ample headroom but also natively supports the 12V-2x6 interface via the ATX 3.1 standard, delivering clean and stable power to PCIe 5.1 graphics cards. This design eliminates energy loss from traditional adapter solutions. Test data shows its 12V output ripple is controlled within 50mV, far below industry standards, ensuring the stability of high-end hardware during overclocking.
As the top-tier certification for PSU energy efficiency, the 80 Plus Platinum standard requires efficiencies of 89%, 92%, and 89% at 20%, 50%, and 100% loads, respectively. The RGB PRO 1300P achieves over 92% efficiency under typical loads, meaning it can reduce annual electricity consumption by hundreds of kilowatt-hours compared to a Bronze-certified PSU. More crucially, high efficiency directly minimizes heat generation. Paired with a 14cm hydraulic bearing fan’s intelligent temperature control system, the fan can completely stop when the load is below 40%, achieving "zero noise" operation. Under high loads, the fan speed remains at around 1,500rpm, with noise controlled below 28dB—significantly quieter than 同类 products (similar models).
A PSU’s durability is often determined by its core components. The RGB PRO 1300P features Japanese 105℃ high-temperature resistant solid-state capacitors, with an ESR (Equivalent Series Resistance) 40% lower than ordinary capacitors. These capacitors can withstand 100,000 hours of continuous operation at 25℃ (MTBF value), and even in 40℃–50℃ environments, power only derates linearly by 20%, adapting to high-temperature chassis conditions. The full modular cable design solves cable management challenges—the embossed braided cables balance flexibility and aesthetics, allowing users to connect only necessary cables to reduce airflow obstruction in the chassis. Combined with the ARGB lighting system, it creates a tidy and 炫酷 (cool) internal space.
Departing from the functional positioning of traditional PSUs, the RGB PRO 1300P elevates the lighting system to the status of an "aesthetic hub for the entire build." Its fan integrates 25 independent lighting modes, supporting static, breathing, gradient, and music-synchronized dynamic effects, which can be switched with a single button via the PSU’s RGB switch. More importantly, it supports the 5V 3-pin ARGB synchronization protocol, enabling lighting 联动 (synergy) with motherboards, water cooling heads, and case fans. Users can even enter a self-check mode (full white light) by long-pressing the switch for easy system lighting debugging. For gamers pursuing personalized PC builds, this fusion of "power core and visual center" is the finishing touch.
In terms of safety, the RGB PRO 1300P is equipped with seven protection mechanisms: OPP (Over Power Protection), OVP (Over Voltage Protection), UVP (Under Voltage Protection), OCP (Over Current Protection), OTP (Over Temperature Protection), SCP (Short Circuit Protection), and OLP (Over Load Protection). This ensures instant shutdown of abnormal currents during power grid fluctuations or hardware failures. Additionally, its 110–240V wide-range input is compatible with global power grids, while cTUVus, TUV, CE, and other international certifications ensure compliance. The RoHS environmental certification reflects its commitment to sustainability.
As hardware performance advances toward "kilowatt-level" power consumption, the RGB PRO 1300P integrates efficiency, reliability, expandability, and aesthetic design on the foundation of 1300W power. It serves not only as the power heart of high-end gaming rigs and content creation workstations but also as a model of the "hidden core" in DIY PC building. While users immerse themselves in 4K high-refresh gaming or 3D rendering, this PSU silently and efficiently provides a solid foundation for every performance surge. For gamers 追求极致 (pursuing the extreme), choosing a 1300W PSU is essentially purchasing a "safety option" for hardware upgrades over the next 3–5 years, and the RGB PRO 1300P undoubtedly stands as one of the most competitive choices in the current market.
RGB PRO 1300P 1300W 80+ Platinum ATX3.1 Power Supply with Adaptive Fan & ARGB SYNC
• 80 Plus Platinum Efficiency: Delivers 92%+ efficiency under typical loads, cutting power use and noise for dependable performance.
• ATX3.1 & PCIe5.1 Support: Native 12V-2x6 connector ensures seamless power to RTX 40/50 GPUs, optimizing delivery and reducing loss.
• Adaptive Fan Control: 14CM fan auto-adjusts speed based on load, balancing energy efficiency with quiet operation.
• High-Quality Components: Japanese 105°C and solid capacitors guarantee durability, stability, and reliability for intensive tasks.
• Customizable RGB Lighting: 25 lighting modes with memory and ARGB SYNC support, enabling personalized and synchronized visual effects.
