Leader TG E-ATX Full Tower Gaming PC Case with ARGB Fans by GameMax, you will surely buy it, not choose other brands
• Because you can'
• find a better configuration than ours
• Reasons: ①Has 6 Auto speed adjustable ARGB fans;②New designs have side opening door
• No need to remove screws, can super easily open the inner case to clean the radiator and graphics card dust, also easy to put in different dolls
• Friends will think your case is cool! ? 4 Highly Configurable ARGB Fans Pre-installed- (1) Ensure your motherboard has a 3PIN RGB interface and use the motherboard lighting software to control the fans, each addressable ARGB fan can offer 16.8 million colors of special customizable lighting
• (2) Adjustable speed PWM fans allow pc case for better silence and better cooling depending on demand
• (3) Remote controller for adjust light mode by built-in program and speed of ARGB fans
• Expensive Glass Side Door - Not only is it more stylish than other brands of gaming cases, but it also solves cooling problems much better
• Tempered glass side panel with metal pull ring that can be opened at any time for 76% better cooling than non-side-opening mid-tower pc cases
• Easily install internal PC components and place any hand puppet you like
• Add to the fun! ? Large-space full-tower case - Meets the installation needs of over 95% of customers
• Plenty of room to easily install the top 420 water drain without touching the memory sticks
• Plenty of space for cable management in case, provides multiple HDD mounting slots, large storage capacity, maximum capacity 4*SSD or 2*SSD+2*HDD
• Meet the installation needs - the chassis provides a variety of graphics card installation methods
• When the graphics card is inserted vertically, the design of the high-transparency glass door can show off your GPU very well
• Smart I/O Panel Design - The equipped multifunctional I/O panel has enough ports to provide great flexibility for a variety of mobile audio accessories
• Includes 1 Type-C Gen2 2x2 port ready for faster transfer speeds
• FRONT GLASS DESIGN: - Clean design, Large front glass front panel for optimal cooling performance, and show ARGB lights of your stylish gaming PC system after build.
| LEADER TG | FTY#9951 | SPECIFICATION |
| Form Factor (Midi, Micro, Mini ITX, Full) | FULL TOWER | |
| Chassis | SPCC: 0.8mm | |
| PSU Form Factor | Bottom/ATX | |
| M/B Form Factor | E-ATX、ATX、M-ATX、ITX | |
| Front Panel | Tempered Glass (Tool-free) | |
| Top Panel | Metal cover | |
| Side Panel | Left | Tempered Glass (Tool-free) |
| Right | Metal cover(Tool-free) | |
| External Drive Bay(s) | 5.25" (ODD) | *0 |
| 3.5" | *0 | |
| Internal Drive Bay(s) | 3.5" (HDD) | *2 |
| 2.5" (SSD) | *7(Optional) | |
| 2*3.5HDD+2*2.5SSD+3*2.5SSD(Optional) or 0*3.5HDD+4*2.5SSD+3*2.5SSD (Optional) | ||
| I/O | Buttons | *3 (POEWR, RESET, LED MODL) |
| USB2.0 Port(s) | *1 | |
| USB3.0 Port(s) | *1 | |
| USB3.1 Port(s) | *1(TYPE-C GEN2) | |
| Audio Support | *1 (HD AUDIO) | |
| Card Reader (Support) | *0 | |
| P-Lock | *0 | |
| RGB Controller | *1(V4.0 PWM ARGB HUB) | |
| Controller max. fans | *9 | |
| RGB Controller max. LED strips | *0 | |
| Remote (IR or RF) | *1 | |
| Cooling Fan Support | Front | 3x120mm( FN12A-6) Installed |
| Top | 3x120mm or 3x140mm (Fan optional) | |
| Rear | 1x120mm( FN12A-6) Installed | |
| M/B Cover | 2x120mm ( FN12A-6) (Fan optional) | |
| PSU Cover | *0 | |
| Water Cooling Support (Radiator Size) | Front | 120mm, 140mm,240mm,280mm,360mm,420mm |
| Top | 120mm, 140mm,240mm,280mm,360mm | |
| Rear | 120mm, 140mm | |
| M/B Cover | *0 | |
| Dust Cover | Bottom, front cover, right side panel and top cover with dust filter | |
| Slots | *7 | |
| Carton Logo | GAMEMAX | |
| Dimensions | Chassis | (L)440*(W)235*(H)480mm |
| Full Case (inc Fascia) | (L)476*(W)235*(H)500mm | |
| Carton | (L)577*(W)328*(H)570mm | |
| VGA Card Length | up to 410mm(front cover w/o fan) （Vertical graphics card support） | |
| CPU Cooler Height | 170mm | |
| SPS Length | up to 290mm(front cover w/o Water Cooling) | |
| Cable Management Depth | 33.6mm | |
